The corners are different and help to find the right position. Pay attention to the correct positioning of the adhesive frame. This way you avoid that something gets stuck on the adhesive frame. Do not remove the last small protective film until you have connected the display and attached the cover plates.Now remove the next large protective foil.You can use the plastic spudger for this. Do not press the adhesive frame firmly until you are sure that it is in place. From there, you can apply it to the device bit by bit. First place the adhesive frame on one edge of the case.Now you're ready to apply the new glue frame.While the port itself is a universal standard, USB 2 came into light way back in 2000 topping out at a maximum transfer. This will ensure a proper fit of the adhesive frame. The USB-C ports in both the iPhone 15 and iPhone 15 Plus supports USB 2. Remove the adhesive residue from the metal frame and display.iPhone 11 is very similar in its design, so the adhesive is applied in the same way. In the pictures we show you how to apply the adhesive frame using iPhone 8 as an example. The Lightning, or dock, connector is the main connection between the charging port and the logic board. To avoid overstretching the flexible cables, you can lean the display against a stable object or use the iHold.ĭo not open the display more than a little over 90 degrees to avoid damaging the sensitive flexible cables. Once you have passed around the device with the plectrum, you can now push the display upwards using the plectrum This will release the metal clamps from the frame.However, this can leave scratches on the frame. You can also use an iFlex instead of the hard plastic plectrum. This is especially important on the side of the standby button, as this is where the sensitive flex cables from the display are located. The tool should not be inserted further than about 5mm into the device to avoid damaging any components inside the iPhone. To remove the display adhesive, you must move the plectrum completely around the iPhone. At the same time, push the hard plastic plectrum between the case and display frame and press the case frame down. Use the key ring on the suction cup to lift the display.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |